| Step | | Procedure & Parts & Tools |
| 1 |
|
PUSH IN ON THE 2 ORANGE TABS TO REMOVE THE BASE COVER.
|
| 2 |
|
REMOVE THE BASE COVER.
|
| 3 |
|
LOOSEN THE BRUSH HEIGHT KNOB AND REMOVE IT. SET IT ASIDE.
|
| 4 |
|
FLIP THE BASE OVER AND REMOVE THE 5 SCREWS.
| Screwdriver-phillips |
|
|
| 5 |
|
FLIP THE BASE BACK OVER AND REMOVE THE BRUSH MOTOR COVER.
|
| 6 |
|
PLACE THE VOLT METER LEADS ON THE WHITE WIRE AND THE BLACK WIRE ON THE CONTROL BOARD. PLUG THE MACHINE IN AND TURN IT ON. THE VOLT METER SHOULD READ 120 VOLTS.
| Volt meter (True RMS capable) |
&Width=100)
|
|
| 7 |
|
REVERSE STEPS 1 THRU 5 TO REASSEMBLE THE MACHINE.
|